Stephatron Posted May 16, 2013 Report Posted May 16, 2013 Holy crap! For a custom exhaust that's practically free! PTuning. . .out of curiosity, do you do TIG welding on stainless? I don't think the custom exhaust was going to cost $185 lol ... I think that was the discount he was given ... I could be wrong. But dang, exhaust for $185, I'm in!
RDG_RCR Posted May 16, 2013 Report Posted May 16, 2013 I don't think the custom exhaust was going to cost $185 lol ... I think that was the discount he was given ... I could be wrong. But dang, exhaust for $185, I'm in! Hell, I don't even have a MINI and I'll buy an exhaust for $185!:top:
elpollodiablo Posted May 16, 2013 Report Posted May 16, 2013 I don't think the custom exhaust was going to cost $185 lol ... I think that was the discount he was given ... I could be wrong. But dang, exhaust for $185, I'm in! ~$1700 for a hand fabricated race exhaust is a really good deal esp if it's stainless. Once you figure in bending, fitting, welding for hangers, flexpipe, cat, mufflers and tips; that's a *lot* of hours of fabrication then tack parts on top of that and it adds up quick. Though Rocko is an R56 rather than an R53 isn't he, that drops the complexity down quite a bit. Alice Cooper - Hyper Blue R53 with a few light mods ???? - Montego Blue 335xi with even lighter mods [sIGPIC][/sIGPIC]
Edge Posted May 16, 2013 Report Posted May 16, 2013 ~$1700 for a hand fabricated race exhaust is a really good deal esp if it's stainless. Once you figure in bending, fitting, welding for hangers, flexpipe, cat, mufflers and tips; that's a *lot* of hours of fabrication then tack parts on top of that and it adds up quick. Though Rocko is an R56 rather than an R53 isn't he, that drops the complexity down quite a bit. Nope, Rocko is an R53... which is why I asked about the wisdom of trying to put the muffler in the middle, when the battery box would directly interfere. :dontknow: "Mr. OEM" - 05 JCW (TK, GPIC, SS, GPTA, R56 RSB, StBr, R56 BBK, GPWhls, SV, RS, R56 GSI, IES, StrWhl, GK, HG, LBIT) MCS, HB/HB, Packs: 1, 2, 3 & 4. LSD, Rear FL, LB/PB upholstery (inc. LB SB & HB), HB Int, Anth. HL, PDC, Nav. OEM: DPSM+Aux, SIRIUS, BT, RV Cam, Aux gauges, ILK, Alarm, AK, PFM, DL, SpLnk, CFD, CSL, BIW, R52 diag rods, EuroTL, EuroWT, EPS, EASM. AM: IanCullAUC, Intravee+KCA420i, SchrothR4, MM-STR. License Plate: SUV2BIG MotoringID: CARVE129
IndiCooper Posted May 16, 2013 Report Posted May 16, 2013 so are you gonna be cutting down to just 1 cat?? thats what i have now, 1 cat up in the down pipe (stock) then stright pipe all the way back to the muffler (magnaflow) :top:
minime331 Posted May 16, 2013 Report Posted May 16, 2013 so the 185 is the discount the total cost is just under 1000 total parts and labor and what im going to get done is a single muffler and resonator under the middle of the car just behind the front seats then run the pipe From the muffler down then a 90° bend to the right then out the back. so think of the one ball design STella- 14' Focus ST Roush CAI, Cobb access port stage1 tune, custom Ptuning 3" exhuast, Levels FMIC, Turbosmart BOV, rally armor mud flaps, more to come.
minime331 Posted May 16, 2013 Report Posted May 16, 2013 so are you gonna be cutting down to just 1 cat?? thats what i have now, 1 cat up in the down pipe (stock) then stright pipe all the way back to the muffler (magnaflow) :top: gen 1 only have one car but have 2 mufflers STella- 14' Focus ST Roush CAI, Cobb access port stage1 tune, custom Ptuning 3" exhuast, Levels FMIC, Turbosmart BOV, rally armor mud flaps, more to come.
Blown_xa Posted May 16, 2013 Report Posted May 16, 2013 so are you gonna be cutting down to just 1 cat?? thats what i have now, 1 cat up in the down pipe (stock) then stright pipe all the way back to the muffler (magnaflow) :top: When is Stickers2 getting an exhaust ? Let me make it . R56 exhaust will be somewhat less expensive because there are minimal bends needed.
Stephatron Posted May 16, 2013 Report Posted May 16, 2013 When is Stickers2 getting an exhaust ? Let me make it . R56 exhaust will be somewhat less expensive because there are minimal bends needed. STKRS 2 already has an exhaust, derp. Hey Justin, there was a question about welding the Beau [elpollodiablo] asked.
Blown_xa Posted May 16, 2013 Report Posted May 16, 2013 STKRS 2 already has an exhaust, derp. Hey Justin, there was a question about welding the Beau [elpollodiablo] asked. I had responded earlier but I guess it didn't go through . To answer his question ; yes we TIG weld upon request. I have the MIG welder set up for stainless as well.
IndiCooper Posted May 17, 2013 Report Posted May 17, 2013 When is Stickers2 getting an exhaust ? Let me make it . R56 exhaust will be somewhat less expensive because there are minimal bends needed. did you really think my exhaust was stock??? :stupid: :rofl:
Blown_xa Posted May 17, 2013 Report Posted May 17, 2013 did you really think my exhaust was stock??? :stupid: :rofl: I didn't really pay attention to it, so hush I was staring at your stickers.
FAST060 Posted May 18, 2013 Report Posted May 18, 2013 Whoo hooo! SMOKIE is ready for her day! https://www.instagram.com/smokiendabandit/ 2009 MCS, HzB/B, CWP, PP, "BLUR" MOTORING ID: SOAR143 - MINI Community Service 2013 JCW GP, Thunder Grey, "SMOKIE" MOTORING ID: FAST060 2014 MCS Clubman, Highclass Gray, "THE ADMIRAL"
minime331 Posted May 18, 2013 Report Posted May 18, 2013 Whoo hooo! SMOKIE is ready for her day! ready for what STella- 14' Focus ST Roush CAI, Cobb access port stage1 tune, custom Ptuning 3" exhuast, Levels FMIC, Turbosmart BOV, rally armor mud flaps, more to come.
FAST060 Posted May 19, 2013 Report Posted May 19, 2013 SMOKIE is gonna "Drop it like its hot!" She is ready to remove the wheel gap! https://www.instagram.com/smokiendabandit/ 2009 MCS, HzB/B, CWP, PP, "BLUR" MOTORING ID: SOAR143 - MINI Community Service 2013 JCW GP, Thunder Grey, "SMOKIE" MOTORING ID: FAST060 2014 MCS Clubman, Highclass Gray, "THE ADMIRAL"
Stephatron Posted May 19, 2013 Report Posted May 19, 2013 SMOKIE is gonna "Drop it like its hot!" She is ready to remove the wheel gap! Drop drop it like it's hot!
Blown_xa Posted May 19, 2013 Report Posted May 19, 2013 :aetsch:that is the craziest smiley Ive ever seen.
Stephatron Posted May 19, 2013 Report Posted May 19, 2013 I like how this entire thread has been taken over and it is no longer about PTUNING ...
minime331 Posted May 19, 2013 Report Posted May 19, 2013 I like how this entire thread has been taken over and it is no longer about PTUNING ... so i was telling... SQUIRREL... o where was i. lol STella- 14' Focus ST Roush CAI, Cobb access port stage1 tune, custom Ptuning 3" exhuast, Levels FMIC, Turbosmart BOV, rally armor mud flaps, more to come.
elpollodiablo Posted May 20, 2013 Report Posted May 20, 2013 Nice to see I'm not the only one here with ADD! Alice Cooper - Hyper Blue R53 with a few light mods ???? - Montego Blue 335xi with even lighter mods [sIGPIC][/sIGPIC]
IndiCooper Posted May 20, 2013 Report Posted May 20, 2013 :stupid::hahaha::party::cheers::ciao::aetsch: :alberteinstein: :creep::eviltongue::elephant::dontknow::sheep:
1975_mini Posted May 20, 2013 Report Posted May 20, 2013 :stupid::hahaha::party::cheers::ciao::aetsch: :alberteinstein: :creep::eviltongue::elephant::dontknow::sheep: this is the emotocon foe ADD:rofl: 1975 Mini 1000, 998cc A+ w/ K&N air filter, 10" Mamba wheels
Stephatron Posted May 21, 2013 Report Posted May 21, 2013 Nice to see I'm not the only one here with ADD! Have you hung out with me or Ali?!
TGGRRR (Ali) Posted May 21, 2013 Author Report Posted May 21, 2013 Have you hung out with me or Ali?! Who me??? I have laser like focus!!! when I want to :captain: Tigger 2006 the cabrio and Riversong the 2014 Countryman
