Scavenger Posted January 5, 2011 Report Share Posted January 5, 2011 Does anyone have a garage or know of a place to work on the car during these cold Winter months? I have a possible project, but it's just too cold to do it outside in the parking lot! 2006 MCS, SB/S , "B.A." Performance: DINAN "Stage 5" tune, throttle body, boost kit (fuel pump, pulley), & CAI; JCW exhaust sans resonator, brakes, & GP IC; DDM IC diverter; CSF Racing Aluminum Radiator Suspension: DINAN front strut brace; Alta 22mm rear bar; KW V1 coil-overs; H-Sport adjustable rear control arms; CravenSpeed strut underators Interior: CravenSpeed gauge mounts with Cooper S boost and voltage, & shift well cover Wheels: Enkei PF01 17" Audio: Kenwood Excelon KDC-X994 HU; MTX Terminator speakers F&B Alan @ opensource.com Link to comment Share on other sites More sharing options...
Brian0758 Posted January 5, 2011 Report Share Posted January 5, 2011 There is place over by Mach V's called "Do It Yourself Mechanics". Craig, Marty and I have been there to do various things. I know the owner and it is a very nice setup. Here is the the link http://www.ditymechanics.com/ that shows the rates for the lifts. I have a garage but until I get my kerosene heater working it is not that warm. Once I get a heating solution you can always come over and work on your Mini. See ya soon, Brian 2012 Jeep Rubicon Link to comment Share on other sites More sharing options...
orcadog Posted January 5, 2011 Report Share Posted January 5, 2011 There is place over by Mach V's called "Do It Yourself Mechanics". Craig, Marty and I have been there to do various things. I know the owner and it is a very nice setup. Here is the the link http://www.ditymechanics.com/ that shows the rates for the lifts. I have a garage but until I get my kerosene heater working it is not that warm. Once I get a heating solution you can always come over and work on your Mini. See ya soon, Brian You "big city" guys get all the cool stuff! Looks like a very cool concept, and the rates are great. Link to comment Share on other sites More sharing options...
Maxicooper Posted January 5, 2011 Report Share Posted January 5, 2011 If you don't mind driving up here, I have a small garage (and Gran Turismo5 plus hot chocolate). Link to comment Share on other sites More sharing options...
RichSperry Posted January 6, 2011 Report Share Posted January 6, 2011 Or a bit further to Eldersburg. I've got a lift, 3 bays, air, tunes, and heat. No matter where you go, there you are! Link to comment Share on other sites More sharing options...
ZugZugMcD Posted January 7, 2011 Report Share Posted January 7, 2011 If you don't mind driving up here, I have a small garage (and Gran Turismo5 plus hot chocolate). If I come over, Chris, can you work on my car while I sip hot chocolate and play GT5? :rofl: 2009 MINI Cooper S Clubman Link to comment Share on other sites More sharing options...
Scavenger Posted January 8, 2011 Author Report Share Posted January 8, 2011 If you don't mind driving up here, I have a small garage (and Gran Turismo5 plus hot chocolate). Nice offer, but rrsperry might have you beat: Or a bit further to Eldersburg. I've got a lift, 3 bays, air, tunes, and heat. Awfully tempting, but it would be a ways for me :motor: If I come over, Chris, can you work on my car while I sip hot chocolate and play GT5? :rofl: Chris, can you bring the hot chocolate to rrsperry's place? :idea: 2006 MCS, SB/S , "B.A." Performance: DINAN "Stage 5" tune, throttle body, boost kit (fuel pump, pulley), & CAI; JCW exhaust sans resonator, brakes, & GP IC; DDM IC diverter; CSF Racing Aluminum Radiator Suspension: DINAN front strut brace; Alta 22mm rear bar; KW V1 coil-overs; H-Sport adjustable rear control arms; CravenSpeed strut underators Interior: CravenSpeed gauge mounts with Cooper S boost and voltage, & shift well cover Wheels: Enkei PF01 17" Audio: Kenwood Excelon KDC-X994 HU; MTX Terminator speakers F&B Alan @ opensource.com Link to comment Share on other sites More sharing options...
Scavenger Posted January 17, 2011 Author Report Share Posted January 17, 2011 There is place over by Mach V's called "Do It Yourself Mechanics". Craig, Marty and I have been there to do various things. I know the owner and it is a very nice setup. Here is the the link http://www.ditymechanics.com/ that shows the rates for the lifts. I have a garage but until I get my kerosene heater working it is not that warm. Once I get a heating solution you can always come over and work on your Mini. See ya soon, Brian Thanks, looks like a nice place. Do they keep it warm in there? I might even try and go up there next weekend to do some stuff. Does anyone else have any work to do? It would be fun to do a group thing :motor: 2006 MCS, SB/S , "B.A." Performance: DINAN "Stage 5" tune, throttle body, boost kit (fuel pump, pulley), & CAI; JCW exhaust sans resonator, brakes, & GP IC; DDM IC diverter; CSF Racing Aluminum Radiator Suspension: DINAN front strut brace; Alta 22mm rear bar; KW V1 coil-overs; H-Sport adjustable rear control arms; CravenSpeed strut underators Interior: CravenSpeed gauge mounts with Cooper S boost and voltage, & shift well cover Wheels: Enkei PF01 17" Audio: Kenwood Excelon KDC-X994 HU; MTX Terminator speakers F&B Alan @ opensource.com Link to comment Share on other sites More sharing options...
TGGRRR (Ali) Posted January 17, 2011 Report Share Posted January 17, 2011 I need to replace my tail lights and I could use a warm garage. I might join you. I would guess that Ed has heat, it's a really nice garage, I've been there too. Ali Tigger 2006 the cabrio and Riversong the 2014 Countryman Link to comment Share on other sites More sharing options...
carman63 Posted January 17, 2011 Report Share Posted January 17, 2011 It's heated. I was there with Craig and Marty recently. Nice setup, all the tools you'd need for practically any job, and friendly folks. Link to comment Share on other sites More sharing options...
TGGRRR (Ali) Posted January 17, 2011 Report Share Posted January 17, 2011 Alan I can go Sat or Sunday, let me know if you want to go this weekend. Tigger 2006 the cabrio and Riversong the 2014 Countryman Link to comment Share on other sites More sharing options...
Scavenger Posted January 18, 2011 Author Report Share Posted January 18, 2011 Alan I can go Sat or Sunday, let me know if you want to go this weekend. Cool, sounds like a plan! 2006 MCS, SB/S , "B.A." Performance: DINAN "Stage 5" tune, throttle body, boost kit (fuel pump, pulley), & CAI; JCW exhaust sans resonator, brakes, & GP IC; DDM IC diverter; CSF Racing Aluminum Radiator Suspension: DINAN front strut brace; Alta 22mm rear bar; KW V1 coil-overs; H-Sport adjustable rear control arms; CravenSpeed strut underators Interior: CravenSpeed gauge mounts with Cooper S boost and voltage, & shift well cover Wheels: Enkei PF01 17" Audio: Kenwood Excelon KDC-X994 HU; MTX Terminator speakers F&B Alan @ opensource.com Link to comment Share on other sites More sharing options...
TGGRRR (Ali) Posted January 18, 2011 Report Share Posted January 18, 2011 but not the butt crack of morning, OK? Tigger 2006 the cabrio and Riversong the 2014 Countryman Link to comment Share on other sites More sharing options...
Scavenger Posted January 18, 2011 Author Report Share Posted January 18, 2011 Of course not! but not the butt crack of morning, OK? 2006 MCS, SB/S , "B.A." Performance: DINAN "Stage 5" tune, throttle body, boost kit (fuel pump, pulley), & CAI; JCW exhaust sans resonator, brakes, & GP IC; DDM IC diverter; CSF Racing Aluminum Radiator Suspension: DINAN front strut brace; Alta 22mm rear bar; KW V1 coil-overs; H-Sport adjustable rear control arms; CravenSpeed strut underators Interior: CravenSpeed gauge mounts with Cooper S boost and voltage, & shift well cover Wheels: Enkei PF01 17" Audio: Kenwood Excelon KDC-X994 HU; MTX Terminator speakers F&B Alan @ opensource.com Link to comment Share on other sites More sharing options...
rickyr53 Posted January 21, 2011 Report Share Posted January 21, 2011 Does anybody know of a tuner shop where i could go get a Pulley installed? I know of a place in Manassas but $350 is just to much for me. Link to comment Share on other sites More sharing options...
Brian0758 Posted January 21, 2011 Report Share Posted January 21, 2011 Does anybody know of a tuner shop where i could go get a Pulley installed? I know of a place in Manassas but $350 is just to much for me. Pulley installs can be pretty expensive due to what is involved. From what I recall a typically install with parts can range from $300 to $400. You might give Dan at MachV http://www.fastmini.net/ and get a quote from him. They are located in Sterling. 2012 Jeep Rubicon Link to comment Share on other sites More sharing options...
rickyr53 Posted January 23, 2011 Report Share Posted January 23, 2011 Thanks, i didnt know they did installs cause when i looked at there site i didnt find anything to suggest that.... yeah it never crossed my mind that it would be that much....now im thinking that i might at well get a crank pulley installed too while im at it. Thanks for the link. Link to comment Share on other sites More sharing options...
Edge Posted January 23, 2011 Report Share Posted January 23, 2011 Thanks, i didnt know they did installs cause when i looked at there site i didnt find anything to suggest that.... yeah it never crossed my mind that it would be that much....now im thinking that i might at well get a crank pulley installed too while im at it. Thanks for the link.Just be careful with how far you go on the pulleys. It's generally accepted that a 15% S/C pulley is a "reliable" mod (with no change in crank pulley). If you decide to go all the way to a 17% S/C pulley and possibly even throw in a 2% crank pulley at the same time... yeah, you'll get more power, but your S/C will need to be replaced MUCH sooner, and you might end up breaking other stuff too. Just saying - be as aggressive as you want to be, but realize the risks you're taking when you do it. ANY pulley change will likely shorten the life of your S/C, but some more than others! Heck, the JCW kit's pulley is only around 12%. "Mr. OEM" - 05 JCW (TK, GPIC, SS, GPTA, R56 RSB, StBr, R56 BBK, GPWhls, SV, RS, R56 GSI, IES, StrWhl, GK, HG, LBIT) MCS, HB/HB, Packs: 1, 2, 3 & 4. LSD, Rear FL, LB/PB upholstery (inc. LB SB & HB), HB Int, Anth. HL, PDC, Nav. OEM: DPSM+Aux, SIRIUS, BT, RV Cam, Aux gauges, ILK, Alarm, AK, PFM, DL, SpLnk, CFD, CSL, BIW, R52 diag rods, EuroTL, EuroWT, EPS, EASM. AM: IanCullAUC, Intravee+KCA420i, SchrothR4, MM-STR. License Plate: SUV2BIG MotoringID: CARVE129 Link to comment Share on other sites More sharing options...
rickyr53 Posted January 23, 2011 Report Share Posted January 23, 2011 Yeah thanks for the advice. I read up on it too and it has me kinda iffy about it. Its just a thought for now, in the end i'd be at 17% cause its a 15% plus a 2% crank pulley. Oh i have another question that i hope somebody could help me in.....I might be getting a set of wheels that i might need to get re-drilled to 4x100 and dont know where i could take them.....does anybody know of a shop where i could go? Link to comment Share on other sites More sharing options...
cmcveay Posted January 23, 2011 Report Share Posted January 23, 2011 Ricky, If you are thinking about going to the Dragon, you might want to get in touch with some of the vendors that are going to be there. I'm pretty sure Helix and Way Motorworks will both be there. Last year, Way did a pulley install in about 10 minutes but I don't know what the charge was. Brian and Ali both had pulley's installed the same day and I believe they both went with 15% pulley's and stock crank pulleys. Brian changed plugs at the same time but I don't remember if he went colder or hotter when he had the pulley done. 2014 Jeep Wrangler Unlimited Rubicon "Homer" 2012 MB/CR JCW R55 "Merlin" Sold 2009 LB/LB R56 "Archie" Sold Link to comment Share on other sites More sharing options...
TGGRRR (Ali) Posted January 23, 2011 Report Share Posted January 23, 2011 Way Motor Works did my 15% pulley for around $300, it took well under an hour. Ali Tigger 2006 the cabrio and Riversong the 2014 Countryman Link to comment Share on other sites More sharing options...
rickyr53 Posted January 25, 2011 Report Share Posted January 25, 2011 Thanks guys i already thought about that too but i dont think im going to be making it to MOTD this year:frown: I have exams :banghead: and Diana also started a new job and cant take off either. We'll be making it out next year tho Link to comment Share on other sites More sharing options...
JAB 67 Posted February 6, 2011 Report Share Posted February 6, 2011 I spent two hours at Do It Yourself Mechanics in Sterling earlier today, doing brakes on my Subaru. Fantastic facility, great people. Every bay was occupied. JAB 67 Fairfax, VA 2004 MCS, PW/B Link to comment Share on other sites More sharing options...