Jump to content
Scavenger

FS: Various Parts mostly for R53

Recommended Posts

Ok everyone, it is time for me to clean out the basement! I've had a lot of MINI parts stacked up and now I need to clear 'em out. The following items are stock R53 (First Gen 'S') parts. Some may fit other models, and some aftermarket items as well. All are "priced OBO".

 

 

 

  1. Ian Cull Auto Up Circuit V1 - SOLD
  2. DDMWorks Intercooler Cover - $80 - Stainless Steel Air Diverter for stock intercooler.
  3. Drivers Side Knee Bolster - SOLD
  4. Stock Air Intake Cover - SOLD
  5. Stock Antenna Base - $15 - No Nav or Sat Radio, only diversity antenna for Boost stereo.
  6. Stock Front Brakes - $90 - Working calipers, these were replaced with JCW upgrade kit, hence no I longer need them.
  7. Stock Intercooler - $60 - Working, but I don't need it
  8. Stock Intercooler Cover - $30 - Cover for above
  9. Stock Rear Lower Control Arms - $60 - don't need them
  10. Basic Rear View Mirror - $25 - No auto-dim or garage door control
  11. Stock Shift Knob - SOLD

  12. Stock Side Marker Signals - $30 - white
  13. Stock Throttle Body - $100 - Working, low miles, replaced with uprated model when car was young

 

 

Pictures by number:

 

2.picture.php?albumid=86&pictureid=595

3.

 

5.picture.php?albumid=86&pictureid=599

6.picture.php?albumid=86&pictureid=600

7.picture.php?albumid=86&pictureid=601

8.picture.php?albumid=86&pictureid=602

9.picture.php?albumid=86&pictureid=605

10.picture.php?albumid=86&pictureid=606

 

12.picture.php?albumid=86&pictureid=608

13.picture.php?albumid=86&pictureid=610

14.

Edited by Scavenger
Updated

2006 MCS, SB/S , "B.A."

  • Performance: DINAN "Stage 5" tune, throttle body, boost kit (fuel pump, pulley), & CAI; JCW exhaust sans resonator, brakes, & GP IC; DDM IC diverter; CSF Racing Aluminum Radiator
  • Suspension: DINAN front strut brace; Alta 22mm rear bar; KW V1 coil-overs; H-Sport adjustable rear control arms; CravenSpeed strut underators
  • Interior: CravenSpeed gauge mounts with Cooper S boost and voltage, & shift well cover
  • Wheels: Enkei PF01 17"
  • Audio: Kenwood Excelon KDC-X994 HU; MTX Terminator speakers F&B

Alan @ opensource.com

Link to comment
Share on other sites

 

I call second dibs on the auto up circuit please!
It sold to the first response.

2006 MCS, SB/S , "B.A."

  • Performance: DINAN "Stage 5" tune, throttle body, boost kit (fuel pump, pulley), & CAI; JCW exhaust sans resonator, brakes, & GP IC; DDM IC diverter; CSF Racing Aluminum Radiator
  • Suspension: DINAN front strut brace; Alta 22mm rear bar; KW V1 coil-overs; H-Sport adjustable rear control arms; CravenSpeed strut underators
  • Interior: CravenSpeed gauge mounts with Cooper S boost and voltage, & shift well cover
  • Wheels: Enkei PF01 17"
  • Audio: Kenwood Excelon KDC-X994 HU; MTX Terminator speakers F&B

Alan @ opensource.com

Link to comment
Share on other sites

are the spring still for sale? I'll happily take those off your hands:rock:

I can pick them up tomorrow if you are free!

 

PM sent. Interested in the stock air intake cover.

 

responded to both :itsme:

2006 MCS, SB/S , "B.A."

  • Performance: DINAN "Stage 5" tune, throttle body, boost kit (fuel pump, pulley), & CAI; JCW exhaust sans resonator, brakes, & GP IC; DDM IC diverter; CSF Racing Aluminum Radiator
  • Suspension: DINAN front strut brace; Alta 22mm rear bar; KW V1 coil-overs; H-Sport adjustable rear control arms; CravenSpeed strut underators
  • Interior: CravenSpeed gauge mounts with Cooper S boost and voltage, & shift well cover
  • Wheels: Enkei PF01 17"
  • Audio: Kenwood Excelon KDC-X994 HU; MTX Terminator speakers F&B

Alan @ opensource.com

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...