Joe Posted April 9, 2014 Report Share Posted April 9, 2014 Hey guys, I'm currently mid motor swap and can't seem to budge this crankshaft pulley. I've used every puller available from napa, harbor freight, and sears. Help! Has anyone done a pulley swap or replacement? Does anyone have a tool I can rent? Thanks Link to comment Share on other sites More sharing options...
Brian0758 Posted April 9, 2014 Report Share Posted April 9, 2014 hey Joe, I used a cheap puller when I replaced mine but don't recall how hard it was to remove. Here is an article from Pelican Parts that might help. http://www.pelicanparts.com/techarticles/MINI/11-ENGINE-Crankshaft_Pulley_Replacement/11-ENGINE-Crankshaft_Pulley_Replacement.htm 2012 Jeep Rubicon Link to comment Share on other sites More sharing options...
Joe Posted April 9, 2014 Author Report Share Posted April 9, 2014 Update! I was an idiot and was pressing on the inside of the pulley. I sank a bolt and voila, slipped right out. For future reference the upper motor mount bolt is a perfect fit and long enough for the puller to rest on. Cheers Link to comment Share on other sites More sharing options...
