Christina-JCW Posted July 12, 2010 Report Share Posted July 12, 2010 (edited) Well - Starbuck lost her crank pulley. I was lucky that it had not completely separated. With 97,000 miles, I should have expected it. My mechanic replaced the alternator, installed a new belt, an axle seal (tranny oil was leaking) everything else checked out.. Well - due to cost issues and discovering the crank pulley when we thought it was the alternator- I decided to buy the M7 2% pulley. It's all back together - and is a lot smoother - especially with the lightened flywheel/clutch from last year. I'll post pics soon. ~Christina P.S. There is a little more power, and the shift points changed again. I was a little surprised when I downshifted to pass a car and I got there a bit faster. I wasn't expecting to catch up to the car farther down that fast. LOL Now if I just had enough $$$ to get a custom tune...not this year... Edited July 12, 2010 by Christina-JCW spelling error...added P.S. Starbuck - 2006 MCS: JCW Engine and Suspension, Alta: 19mm Rear Anti-Sway Bar, Rear Control Arms (top & bottom), Rear End-Links, Alta intake hose, Alta Intercooler Diverter v2 Helix:Rear Seat Delete M7: Front Strut Bar, 2% Crank Pulley MiniMadness: JCW Air Filter & Polyurethane rear strut bushings. Link to comment Share on other sites More sharing options...
