DuB?
-
Posts
57 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by DuB?
-
-
The parts aren't all that bad. . . the labor, well, lets just say: The front of your MINI has to come off, and it isn't pretty. Figure a full 3-5 days for labor if dealing with a shop.
I had my clutch upgraded under 2 days after driving it off the lot, went to visit, was SHOCKED to see the whole front end of my 2003 on the ground, I almost cried.
Because it was all under warranty, I didn't worry, but, to see the car in such a state of disrepair, I NEVER thought it would come back together (and this is after me rebuilding 2 of my of my own cars, back in the day). End of the day, life is good. . . but, it's NOT a small job.
Find a shop that knows what they are doing, buy your own parts to supply them with, and cross your fingers, hope for the best.
Thanks for the info! Im shopping around for labor rates=D I am a DIY kinda guy, but from what I read the engine and tranny need to come out and its just a a hassle. I dont have the time haha
-
should be a pretty simple, straight forward fix. . . though I am not sure why a curb check would throw things off. . . it's either a motor, breaker, or a whole assembly. I am not even sure why a curb check would even effect your window, period. Check your connections. If it didn't set off your airbags, then I am not sure how this would have changed the motor function of the window. You found stock wiring, from what I see... if your airbag didn't go off, then it should be a simple fix.
Stay alert, please.
Those are wires, They are metal cables =/ When I had the panels off today everything was secure. This Im reallllly low the curb check did a lil more damage =(
-
Have you tried emailing the guy parting out his MINI S on Craigslist?
Ill email him, But I think the r56 has a different window system then the r53. Thanks for the heads up!
-
Sooo the other day I ran into a little issue (lol) Went into a curb at medium speed. (dowsed off ) My window stopped functioning all together. Finally got around to disassembling the door to check out the regulator and other parts and find this...
The wires, im guessing are used like a pulley system, were choked up around the gear on my reg. Not sure if there is an easy way to fix this issue. Any one know where I can get OEM window parts besides a junk yard?
Thanks
DuB?
No luck this week with ma mini :banghead:
-
Trying to get a feel for how much this badboy is gonna cost to get replaced:banghead::banghead::banghead:. I know most places sell the OEM one for ~300usd, but Im tryna figure out labor. If anyone has exp with getting theirs replaced please share cost(if you dont mind), where you got it, and if you recommend them.
Thanks in Advance
~DuB?
-
sale pending
-
Hey all,
Have an Xbox 360 slim 4gb model. All i have is the console =( I left most things in europe while I was working over there for a few months, shipping to get it back would have been nuts. My loss your gain $80 cash takes her, only game I have is a new copy of skyrim was preordered and never played ahhaa.
Thanks
DuB?
pm or text 571-409-0655
-
I have a first gen HD hero cam, shoots in 720 and Im pretty sure 1080p. Lookin for $60 obo http://gopro.com/cameras/hd-hero-naked-camera/
All I have are the micro USB > USB cable and the 16gb memcard. Not sure where most of the other stuff but if I can find it Ill toss it in the package
For an extra 20 I can throw in the craven mount for the tow hook.
Lemme know,
Dub?
pm or text 571-409-0655
-
Gen2 Red S outside of Startbucks in Ashburn this morning. After I got my coffee and came back the cooper was gone, And I searched high and low to see if the card was discarded hahahaha It wasnt!!!!!! :rock:
Feels Good
~DuB?
-
For anyone that didn't have the opportunity to see Gremlin today, riding a bit low.
[ATTACH]613[/ATTACH]
[ATTACH]614[/ATTACH]
Looks awesome man!!!!
-
I think Mike is still trying to find a tripod that's low enough to do this justice! We had to laugh when he took the car off the jack stands the first time. Not only was there no wheel gap, the rubber was STUFFED! I'm pretty sure a #2 pencil would have been an obstacle! Back up in the air, adjustments to be made.
We'll get some pics at the pumpkin-less pumpkin run later today. We might be able to get a few of the lowered cars together for it.
I get off work at 9am, So a few redbulls And I may see you guys for the start of the run! Can wait to see pics if I cant make it out haha
-
Thanks to Craig and the GarageMahal, he helped me install my coilovers.
Picssssss
-
Here's one for your "Look what I did over the weekend" file. Look closely though. Safety glasses and all were in place!
Thanks a ton! Pic looks awesome :rock::rock:
-
Just wanted to say that I had a blast today
~DuB?
-
what exactly does hubcentric do? Just push the wheels out to the edge of the car? That would look goood.. does it in anyway mess the with stability or damage the wheels?
By hubcentric it means they are made to Fit the 56mm bore of the mini's hub.(or what ever bore you order) So its a prefect, more balanced fit.
~DuB?
-
Will do!
-
As the title states I have some Hubcentric Spacers (cant remember brand) 2x 15mm and 2x 25mm. Ill let em go for 20 a spacer(x1) or 70 for the set(x4)
I do not have the extended lugs for the 15mm's or the studs for the 25mm Sorry =(
Paypal/cash/credit Will ship if need be.
Lemme know
~DuB
-
-
After I get to install the exhaust I'll finally get to motor a little more comfortably. Since I came from a catless turbo back exhaust on my Subaru.
Waiting here at Oxspeed to get the SC pulley installed!
Catless Tubrobacks >>>>>
I love my Invidia Q300, You shouldn't be disappointed with the N1. If you need any help on a Friday or Saturday lemme know, Id love to get my hands dirty haha
-
Looks awesome!!!!
-
Had a ton of fun today! It was great meeting everyone. Never been surrounded by soo many fellow miniac's
Cant wait for another meet or a drive
~DuB?
-
Along with tons of cookies, I will be bringing my portable Disc Golf basket/hole So if anyone "frolfs" bring your discs
~Dub?
-
Saw a Pepper White MCS Going topless in Ashburn. Plate "GO MOTOR".
Sorry I didn't wave, I didn't notice you next to me until you squeeled some rubber at the stoplight ;P
Seen the same one, Got waved at the other day!
-
Its a helix stepped core intercooler. I would like to get $400 for it. New they are around $750. No mounting hardware required,no modification required, fits in the same mounting points as the stock one.
pm'd
Hmmmmm window issues...
in Maintenance & Modifications
Posted
Huge Thanks! Ill look into it asap! :rock: