VTHokieJen Posted June 12, 2015 Report Share Posted June 12, 2015 The paint has chipped off in some places on my wheels (scraping the curb ). What paint (brand, type) should I buy and from where? They are glossy black wheels. Thanks! [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
TheMichael Posted June 12, 2015 Report Share Posted June 12, 2015 depending on the wheels, I might have a set that I could sell you cheap.... Link to comment Share on other sites More sharing options...
isherri Posted June 13, 2015 Report Share Posted June 13, 2015 The paint has chipped off in some places on my wheels (scraping the curb ). What paint (brand, type) should I buy and from where? They are glossy black wheels. Thanks! Did you see the thread about the Plasti Dip party? I'm plasti dipping my wheels to look like daisies. I don't know if you are interested in plasti dipping yours but you are welcome to join us. Corey even set up a fun drive to get there! Link to comment Share on other sites More sharing options...
isherri Posted June 13, 2015 Report Share Posted June 13, 2015 FYI there's a thread with all the info and amusing comments but to sum up, Here is the start time and location. It's this Sunday. I'll probably be at the starting point by 8:40. You should join us! Even if you don't want to plasti dip, it's going to be a fun ride! Start Point: J. Michael Middle School 26020 Ticonderoga Rd Chantilly, VA 20152 ***note: be sure to turn on to Ticonderoga from Braddock Rd, as the road is rough and unpaved from the other direction. Start time: 0900 (wheel up time) drivers meeting 0850 Distance: 47.3 miles (1hr 15 min) Link to comment Share on other sites More sharing options...
R53NERD Posted June 13, 2015 Report Share Posted June 13, 2015 Any gloss black should work fine. I know BMW has a specific silver for wheels but I'm un sure about a black. Sand out the curb dings with a rotary tool and use a small amount of filler. Scuff it up prime it and respray. Link to comment Share on other sites More sharing options...
VTHokieJen Posted June 13, 2015 Author Report Share Posted June 13, 2015 Yep, I saw the plasti-dip thread. I won't be able to make it there. Thanks though. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
mbiedzinski Posted June 15, 2015 Report Share Posted June 15, 2015 This is why I purchased the wheel and tire insurance when I bought Phineus. It was great being able to just call up MOS and tell them I needed to have the curb rash rubbed out when it happened and to replace a run-flat when it was punctured by a screw. Link to comment Share on other sites More sharing options...
